197 raystar raystar optronics,inc. oled graphic type absolute maximum rating electronical characteristics mechanical data feature dimension drawing RET013232A oled graphic 132x32 dots 1 20 1.80 20- 1.0 pth 14.30 12.0 60.0(va) 63.84 84.0 0.5 36.0 15.83 15.33(aa) 14.50 18.0(va) 11.58 44.0 0.5 4.0 26.64 2.50 55.41(aa) 10.08 2.50 42.0 79.0 2-r1.25 pth 2-r2.5 pad 2- 2.5 pth 2- 5.0 pad 5.1 9.7 max 1.60 icssd1305 4.2 132*32 dots 23.50 4.0 10.2 p2.54*19=48.26 35.0 dot size scale 10/1 0.39 0.42 0.45 0.48 1. 132x32 dots 2. built-in controller ssd1305t7r1 3. +3v power supply 4. 1/32 duty cycle 5. interface: 6800, 8080 & spi & i2c optional 6. sunlight readable & polarizer optional 1 2 3 4 5 6 7 8 9 10~17 18 19 20 symbol vss vdd nc d/c cs nc nc e r/w db0~db7 res disp nc function ground. power supply for analog circuit. no connection data/ command control. pull high for write/read display data. pull low for write command or read status. chip select input. no connection no connection data read operation is initiated when its pull low. data write operation is initiated when its pull low. data bus. reset signal input. when its low, initialization of ssd1305 is executed. display off no connection pin no. item module dimension view area active area mounting hole dot size dot pitch dimension 84.0 x 44.0 x 9.7(max) 60.0 x18.0 55.41 x15.33 79.0 x 36.0 0.39 x0.45 0.42 x0.48 unit mm mm mm mm mm mm min -0.3 8 max 3.5 16 unit v v notes 1, 2 1, 2 parameter supply voltage for logic supply voltage for display symbol vdd vcc characteristics supply voltage for logic supply voltage for display high level output low level input operating current for v dd sleep mode current for v dd high level input low level input symbol v dd v cc v ih v il v oh v ol i dd i dd, sleep min 2.4 11.0 0.8xvdd 0 0.9vdd 0 - - typ 2.7 13.0 - - - - 30 - max 3.5 15.0 vdd 0.2vdd vdd 0.1vdd - 1.5 unit v v v v v v ma ma conditions - - i out = 100a, 3.3mhz i out = 100a, 3.3mhz i out = 100a, 3.3mhz i out = 100a, 3.3mhz note 4 note 3: brightness (lbr) and supply voltage for display (vcc) are subject to the change of the panel characteristics and the customers request. note 4: vdd = 2.7v, vcc = 13v, 50% display area turn on. raystar optronics, inc.
|
